|
CRF Ceramic With Granular Activated Carbon Cartridge
- Made of natural mineral clay mixed with high grade powdered activated carbon block.
- The cartridges can be regenerated by scrubbing and flushing the outside surface with tap water.
- Has very strong mechanical characteristics.
- Low pressure drop with large flow rates.
- Effective filtration down to 0.3 micron.
- Designed specifically to filter mechanical contaminants and organic chemicals.
- Made of ANSI/NSF/FDA approved materials
- It has PZH health certificate.
- Working temperature 1oC - 52oC.
- Capacity without flushing - 3 to 4 months*
* Depending on water quality and level of contaminants.
Tested at: 6 atm, 15oC, nominal flow rate.
|
 |
Technical specifications
- Filtering material: natural mineral clay / powdered activated carbon
- Size (ht. x dia.) [inch] - 9 7/8 x 2 1/2
- Optimum filtration > 0,5 micron
-
Flow rate - 3 l/min (depending on water quality)
- Capacity (without flushing) 2 to 4 months or 8000 liters*
- Pressure drop [bar] - 0,2 - 0,4
- Working temperature 2oC/52oC.
|
Previous Page: CBF series
Next Page :WSF water soften resin series |
|