PMB Series
- Spun polypropylene fiber cartridges belong to the latest generation in filtration technology.
- They are made of polypropylene fibers resistant to many chemicals and bacteria growth.
- Special design allows for gradient adsorption of contaminants thus prolonging the effective life of the cartridge.
- Low pressure drop with large flow rates.
- Designed specifically to filter mechanical contaminants like sand, silt and rust with size up to 1, 5, 20, 50 microns.
- Made of ANSI/NSF/FDA approved materials
- No lubricants or anti-static agents are used in our manufacturing process.
- Working temperature: 5oC - 52oC.
- Filtration life: 3 to 6 months*
* Depending on water quality and level of contaminants.
Tested at: 6 atm, 15oC, nominal flow rate. |
 |
PMB series filter cartridges are available in three types of plain surface, pressed plain and grooved outer surface and will fit most standard filter housings. Standard filter lengths and special sizes are available. Cartridges are individually shrunk wrapped and labeled. Purimate sediment filters have the micron rating embossed on the side of every cartridge for easy identification.
Technical Specification
Cartridge Length: |
4-7/8”, 9-3/4”(248mm), 9-7/8”(251mm), 10”(254mm);
19-1/2” (495mm), 20” (508mm);
29-1/4” (743mm), 30’(762mm), 40” (1016mm) |
Inner diameter: |
1-1/8”(F28mm),1-1/4”(F30mm) |
Outer diameter: |
2-7/8”(F64mm), 4-1/2”(F115mm) |
Nominal micron rates: |
1mm, 5mm, 10mm, 20mm, 50mm. |
Max. operation temperature: |
125° F (52°C) |
Mainly Application:
Drinking water, Reverse Osmosis System, Food and Beverages, Hotels, Housing Complexes, General Commercial and Industrial Filtration
Notes:
Purimate PMB (polypropylene melt blown) filter are designed for sediment removal from potable water. These filters will not remove all cysts, bacteria or viruses. Combined with other super purifier or Purimate UV sterilizer as the combination water purifier system are recommended. |
Products
Cartridge>> Sediment>>PMB Series 
浙ICP备05037372号