|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SSF Series |
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Choice of 304 or 316 stainless steel
Fits most cartridge filter housings
Fabrication is by welding and crimping
(no adhesive or epoxy bonding)
Temperature range up to 500 degrees F (260°C)
Unaffected by most caustic fluids
Can be cleaned and reused
Withstand differential pressure up to 60 psi
Particle retention ratings as fine as 5 microns
Element surfaces can be plain, cylindrical or pleated to increase surface area
Pleated units rated 100 microns or finer have an underlining support layer of coarser mesh to prevent pleat collapse
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Technical Specification
|
|
|
|
|
|
|
|
Cartridge Length: |
9-3/4”(248mm), 9-7/8”(251mm),10”(254mm);
19-1/2” (495mm), 20” (508mm);
29-1/4” (743mm), 30’(762mm),40” (1016mm)
|
|
End Configurations
|
Double open end with seals
Single open end with seals
Twin O-ring - opposite end closed
Male NPT 1" - opposite end closed Female
NPT 1" - opposite end closed
|
|
Inner diameter: |
1-1/8”(F28mm),1-1/4”(F30mm)
|
|
Outer diameter:
|
2-7/8”(F64mm), 4-1/2”(F115mm)
|
|
Nominal micron rates:
|
5mm, 10mm, 20mm, 30mm.
|
|
Max. operation temperature:
|
1°C - 250°C.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pleat Protectors (Optional) |
|
|
|
Made of stainless steel with ¼” diameter perforation, they prevent accidental denting
of the pleats - damage that results in a reduction of filtration area. These protectors
are held in place by bending tabs affixed at the top and bottom. |
|
|
|
|
|
|
|
|
|
|
|
|
|
Mainly Application:
|
|
|
|
|
|
|
Drinking water, General Commercial and Industrial, Hotels,
Housing Complexes |
|
|
|
|
|
|
|
|
|
|
|
|
|
Notes: |
|
|
|
|
|
|
Purimate SSF Stainless Steel Filters are designed for sediment
removal from potable water. These filters will not remove all cysts, bacteria or
viruses. Combined with other super purifier or Purimate UV sterilizer as the combination
water purifier system are recommended |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|